Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #22  
Old 12-16-2007, 02:45 PM
Don Lindsly Don Lindsly is offline
Ex-Philco
 
Join Date: Jul 2005
Location: Colorado
Posts: 450
Ringing is usually caused by a mismatch. Note that the horizontal output transformer and yoke are in series, unlike most arrangements of the era. The lin coil, flyback and yoke must all match. Universal replacements for the flyback, yoke and lin coil rarely worked. Make sure you have RCA originals. The lin coil and surrounding components are critical. I discourage substitutes. When the lin coil is adjusted correctly, the width is at max and horizontal output tube current at minimum. That lin coil will have more effect than in conventional configurations.

If it has a green Merit HOT, you have probably found the problem.

Make sure the 500 mmf high voltage filter cap is OK.

Don
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:16 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.