![]() |
|
|
|
#1
|
||||
|
||||
|
There are still a few I know of... An elderly lady in Brentwood, CA is still using a CTC-16, and I think it's the only TV in the house. It's serviced by my friend's shop in West LA. Also I know of a CTC-4 as main TV, but that belongs to a collector. Also among collectors, Dr. Dan uses a Magnavox roundie on a regular basis. About a year ago, another older lady brought a Zenith 12" B&W tube set in for repair, and she said it was her only set.
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10 |
|
#2
|
||||
|
||||
|
Charles, do you know how much TV viewing is done on these sets? I think if they were used in an air-conditioned environment for maybe a few hours of viewing each night and maybe not every night, the sets would have such a better chance of long-term trouble-free life.
It was really the 12 hour a day (or more) TV usage that a lot of families with kids seemed to have that just killed the tube sets with heat buildup. I've got a CTC-22 portable that had been used in an air-conditioned office all its life, probably seeing little use, and it's amazing how good the picture looks. It seems to have almost no degradation of any components. I need to install some fans on it to try and help mitigate the huge amount of heat it produces and help keep it in its like-new state. |
|
#3
|
|||
|
|||
|
I am like Andy, I like collecting and repairing the tube type TVs, but believe that solid state sets can be made much more reliable. The keys are the heat reduction and the fact that solid state devices do not wear out near as fast as tubes.
I have seen tube sets with little use and a lot of use. I have found that with the sets with little use, it is fairly easy to get these working well. However, with the other sets, all parts seem to have been fried from the heat and sometimes it is very difficult, if not impossible to get these working , even with new tubes, etc. Of course the construction of the sets makes a difference, with the Zenith hand crafted chassis being the best(no charcoaled PC boards). Another big advancement in later solid state sets were the tuners. The old mechanical wafer tuners from the 1950s/1960s are horrible, especially if they have been heavily used. |
|
#4
|
|||
|
|||
|
Quote:
|
|
#5
|
||||
|
||||
|
Quote:
__________________
This device isn't a spaceship, it's a time machine. It goes backwards, and forwards... it takes us to a place where we ache to go again. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|