Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 12-08-2007, 01:51 PM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
There's a 1/2-watt resistor, and a small electrolytic (sorry, can't remember the value of either,) that are mounted on the reverse side of the flip-down chassis, on behind the horizontal oscillator (9-90) module, and below the tripler. I wish I could be more specific, but it's been years. That resistor will be burnt and probably will crack in half when you touch it. If that's the case, the small electrolytic right next to it is leaky and caused the resistor to overheat. That's a 98% good guess at your foldover/shrink problem, IF it was intermittent at first.

As far as no raster, but has HV, check your vertical output fuse and the 9-92 or 9-147 vertical module. The fuse, if the G chassis has it, will be right next to the module. There's a beam killer circuit that stops the raster on those sets if the vertical collapses.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:32 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.