Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2007, 05:44 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
Interesting idea, I wouldn't even know where to start with such a thing, but I wonder if it could be done with the old fashioned components we're all used to: tubes, caps, coils and such things, even if the converter had to be the size of a big tv-radio-phono combo set.

It's a little off topic, but has anyone found any particular converter good for tv dx? The one thing that dissapoints me the most about the switch to digital tv is I will not be able to dx with my old sets, since 1996 I've been living in apartments and been unable to put up an antenna, and it looks like by the time I will be able to have a place to put up an antenna, it won't be of any use to me anymore.
Reply With Quote
  #2  
Old 11-06-2007, 05:51 PM
Carmine's Avatar
Carmine Carmine is offline
...enjoys spaghetti.
 
Join Date: Feb 2003
Location: Detroit area
Posts: 1,612
I should confess that the reason I'm posting is because I had an idea for an electronic product, and although I can totally visualize it, I'm certainly not at the level of electronic IQ to build it.
__________________
From Captain Video, 1/4/2007
"It seems that Italian people are very prone to preserve antique stuff."
Reply With Quote
  #3  
Old 11-17-2007, 09:10 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
Quote:
Originally Posted by Adam View Post
but I wonder if it could be done with the old fashioned components we're all used to: tubes, caps, coils and such things, even if the converter had to be the size of a big tv-radio-phono combo set.
In a word, no. The demodulator part can be squeezed into about a 1.5 to 4.5 inch high rack mount chassis using the latest FPGA (field programmable gate array) chips. The huge number of transistors (logic gates) are needed for the adaptive equalizer, since the digital signal must have all "ghosts" cancelled before the signal can be demodulated. At that point, you have a stream of digital bytes (MPEG Transport Packets), and you need an even more huge number of transistors to do the motion-compensated decoding of the MPEG bit reduction algorithms.
So, your closest hope would be to do a multi-layer PC board using the custom chips that have been designed for these tasks. What originally filled a series of a dozen or so 19-inch-wide by 6 foot tall racks in the early 90s now is on 3 or 2 or even 1 custom chips in a digital TV. The "Digital Terrestrial Converter Boxes" that qualify for the government $40 coupon will probably all have a single "system on a chip (SOC)" that takes the IF from the tuner and goes all the way to composite video and stereo audio for your old TV.
You could conceivably design at home a tuner system (RF, mixer and perhaps IF stages) to feed the above-mentioned digital stuff, but you still might have some difficulty if the SOC needs some particular interfacing.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.