Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 11-03-2007, 11:57 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
In general, you can't check a resistor in-circuit. Also, digital meters do very funny things when measuring resistances in-circuit. However you can verify if the reisitor is "definitely OPEN", or "MAY BE OK" with an old analog meter. You just can't measure "DEFINITELY OK". If you measure it at value or less than value, it "may be OK". If it measures higher than value, it probably is open or increased in value.

The other caution is that you may accidentally blow the meter by measuring a resistor which may be open, so your meter will get the charge from a capacitor somewhere upstream because the open resistor couldn't bleed that charge down. Always put a clip lead across any resistor for a second to short out any charge before you go try to test it in-circuit. That should protect you from a meter blowing Digital meters will still sometimes read funny because of harmonics in the circuit.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10

Last edited by kx250rider; 11-03-2007 at 11:58 AM. Reason: typo error
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:46 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.