Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 11-01-2007, 04:42 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Smile

I have an RCA set very similar to yours. The circuit boards on mine were solder mounted via bent metal tabs of the chassis in such a way as to make it very difficult to get at the solder traces of the boards. So I cheated and just clipped the wax cap leads with enough above board lead length so I could "J hook" the new cap leads to them and solder the Js. It worked. I didn't try to unsolder the circuit board mounting tabs, as there's still a ton of wires still connecting the board to elsewhere in the set anyway.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:44 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.