Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-28-2007, 05:09 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Quote:
Originally Posted by ChuckA View Post

Also for areas with low signals there was a "Channel Adjuster" kit available. Consisted of a dual pot and switch assembly, it added a voltage divider to the contrast control that allowed you to manually adjust the voltage on the AFC bus from negative to zero to positive.



Chuck
Someone was selling some of these kits NOS on eBay for a while, I tried to get one but was always outbid, couldn't understand the demand for something that only a handful of people would need?
Reply With Quote
  #2  
Old 10-28-2007, 05:54 PM
ChuckA's Avatar
ChuckA ChuckA is offline
VideoKarma Member
 
Join Date: Jun 2002
Location: Eastern Pennsylvania
Posts: 447
Quote:
Originally Posted by Eric H View Post
couldn't understand the demand for something that only a handful of people would need?

Eric,

I doubt it was something many people wanted in 1948 either, I have a few NOS units around here someplace also.


Chuck
__________________
www.myvintagetv.com

Learn from the mistakes of others -
You can't live long enough to make them all yourself.
Reply With Quote
  #3  
Old 10-09-2008, 02:02 AM
forjack842 forjack842 is offline
AK Member
 
Join Date: Jun 2006
Posts: 12
Just finished a 48-700 and have a 48-1000 waiting

Finally finished the 48-700 electrical restore. A bit of fun with the HV caps. Tall one shorted about 3 hours after the 3 day long variac power up cycle completed. Typical!! Metal HV oil cap under chassis arced internally often enough to be a pain so it was retired. Big one stayed inplace disconnected, the oil one gone. 0.1uf Tesla caps are available to 10kv and fit nicely under the chassis. 6kv one for the video coupler also available and cheaper. All a bit pricey, but readily available on Ebay. Definately do not want to get across those 10kv'ers!! The rest was standard cap, resistor and wire replacement. Video and Audio alignment went perfectly. Used a Leader 480 U80 S&M. Does a nice job in the 24Mhz IF. John F helped me with a few tuner strips. Had to rewind 2 to get on freq. I needed ch 2 4 and 6 for my home TV 3 channel station. Not worried about any 2009 digitial BS. I'm still very low power analog throught out the house. 4 servers, 1 RAID, 3 agile modulators, KMPlayer and bingo! 24/7 RF to rabbit ears. Just like the 40-50's! Love XPMedia Center and Xvid...all the old programing all the time.

Anyone have a source for the tuner number/stars repros?? Might be able to scan them in.
Jack
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:58 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.