![]() |
|
|
|
#1
|
||||
|
||||
|
Was the set "thrown" in the trash or gently "set" there?
If it was tossed the shadow mask could be damaged, no repair for that except a new CRT, but let's hope for the other options. If you have a Weller soldering gun they make a dandy degaussing coil, just power it up next to the screen and wave it in a circular motion while pulling it away, when you get far enough back that it's not affecting it anymore release the trigger. |
|
#2
|
||||
|
||||
|
Quote:
reminds me of this year's new years find, 32" 1999 sony that needed the power supply/horiz out kit... works fine now....
__________________
![]() Nothing is ever completely fool proof, because fools are so ingenious. |
|
#3
|
||||
|
||||
|
If you can read the chnnel numbers fine, then convergence is fine. Also, I would definitely resolder the tuner and controller, sounds like this could be the tuning issue
|
|
#4
|
|||
|
|||
|
Quote:
Also, I believe that Trinitrons don't use a shadow mask. They use the apeture grille design. In any case, the casing is undamaged, so I highly doubt anybody threw it. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|