Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 10-22-2007, 07:15 AM
compucat's Avatar
compucat compucat is offline
1949 Motorola 9VT1
 
Join Date: Apr 2005
Location: Suffolk, VA
Posts: 970
Vertical Setup Controls

The height control is concentric with the brightness control. I have the 25MC33 chassis, yours should be similar. The brightness knob should have a small hole in the center (if it's on the correct shaft). Insert a thin flat blade screwdriver and adjust. The linearity control is in an unmarked hole in the control panel as posted earlier. They are a little tricky to locate but the Zenith engineers were thoughtful enough to put these controls in front where the settings can be observed much more easily. You can touch up the vertical as needed without ever moving the set. I hope this helps and enjoy that roundie. There is nothing like a Zenith.
__________________
Just look at those channels whiz on by. - Fred Sanford
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.