Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-21-2007, 11:33 PM
jpdylon's Avatar
jpdylon jpdylon is offline
<-- sucker for old sets.
 
Join Date: Apr 2005
Location: Knox County, Tennessee
Posts: 1,675
I think the only ohm test you could perform on it would be to ohm out the heater filament. Again, this is really only to tell if a heater would light up, and doesn't tell if all heaters are good nor emission.

The CRT tester is really the only way to test if the CRT is good --and of course seeing if it will hold a good grayscale, and color picture without looking chalky, or defocusing even though voltages are normal.

The tester puts a small amount of current between the gun elements. The amount of current measured in micro amperes is the gun's emission --or at least a way to measure it. More sophisticated testers will detect grid leakage or gassy tubes. How they do that exactly varies by manufacturer --and quite frankly I don't know
__________________
Jordan
Reply With Quote
  #2  
Old 10-21-2007, 11:42 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
got it... Thanks! Just hoping to see my CRT tester soon!! The dude on ebay accidently sent it off to Japan!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.