Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 10-17-2007, 11:52 AM
julianburke julianburke is offline
VideoKarma Member
 
Join Date: May 2004
Location: Knoxville, Tennessee
Posts: 649
Quote:
Originally Posted by fujifrontier View Post
Not to highjack the thread, but what would happen if the button was broken, or it lost vaccum while a CRT was in operation? The heaters would burn up as soon as air enterd the tube, right?
No. If a tube starts to lose its' vacuum during operation, it will immediately begin to arc all over the gun mount with blue sparks. This is how you can tell quickly in a solid state set if you have a broken tube or not and you can certainly hear it with a distinctive sound that sounds like a loud hissing in the tube itself. Strangely, the filament will not open up as it is very tough and goes to almost zero ohms as like a dead short. There is not enough current in the filament voltage to make it burn out. (later sets mostly)
__________________
julian
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.