Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 03-31-2004, 02:30 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally posted by heathkit tv
Shove come to push you could always run a VCR as the stereo source. This would also give you remote channel selection, just leave the set on ch. 3 of course. Seems to me that this will be the solution to when broadcasters switch to digital.

Anthony
That is exactly how I plan to handle the changeover from analog to high-definition digital, if I still have my two 19" color sets then. I have Comcast digital cable, which uses Dolby digital cable boxes for analog sets (I have one on my RCA XL-100 in my living room). These are likely digital-to-analog converters, so the user's analog TV and VCR remain on channel 3 or 4 to receive the converter's output. The boxes all have remote control, so even if it's connected to a TV with a detented VHF selector, it will convert the set to remote and silent digital tuning/volume/on-off control just like that. Just put the old set's selector on channel 3 or 4 (as we did years ago with UHF converters on older VHF-only sets, only their output was on channel 5 or 6), and there you are. (Saves wear and tear on the old tuner as well.) Just like downtown, even with a 50-year-old set or even a small b&w portable.

The only thing I don't really like about the newest cable boxes, at least Motorola's latest ones (I just had mine replaced by a new model) is that the only way to control them is with the remote; there are no buttons, switches, etc. whatsoever on the box itself. This could put a set owner in a bad situation (no way to operate the cable box, leading to no reception) should the remote cease to function for any reason, including dead batteries. Why didn't Motorola think of that before putting this type of converter on the market? I can only wonder how many cable subscribers have complained to Comcast (and other cable companies using Motorola digital cable boxes) about this.

One way around the problem, however, would be to have a universal remote programmed to operate your brand of cable box, so if anything happens to the original remote the user would still have a method of operating the box. Comcast (and probably other cable companies as well) will allow its customers to use their own aftermarket remotes (or the one which came with their TV or VCR) to operate the cable box if the customer so desires, and if the remote is capable of being programmed to operate the box. I have several universal RCA remotes which will operate the cable box on my living-room TV just fine, though I prefer the original remote since it provides for master power control of a TV, VCR and the cable converter itself; one button turns on and off all three units at the same time.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.