Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-20-2007, 11:46 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Quote:
Originally Posted by Steve Hoffman View Post
How would the picture quality on the monitor differ from the commercial sets of the day? More intense, brighter? More accurate, etc.?
The monitor would have full DC restoration, while the consumer set would not. The high voltage would be regulated more closely than on a consumer set, meaning the raster geometry would not change with beam current. [Later pro monitors had a separate HV supply and horizontal sweep - I do not know what was in this one.] The monitor MAY have had the white point set to Illuminant C if the owner was careful and had the proper equipment, but the consumer set definitely would be set much bluer. The monitor may have had color matrix adjustments rather than fixed resistors - don't know without seeing a schematic. Also do not know if the monitor had any more elaborate convergence circuits.

The picture tube on this monitor has the greenish color typical of sulfide phosphors, which means it would not have NTSC primaries, but would have the same primaries as consumer sets. Much later, SMPTE would adopt the "C" (for Conrac) phosphors as a standard, which were not NTSC either.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.