Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 09-10-2007, 01:03 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by bgadow View Post
I pulled the chassis over the weekend and immediatly spotted something. Both leads had broke loose from the thermistor. It makes my brain hurt, but I'm trying to think...doesn't that have to be there for the set to work? The leads were still close enough in contact for an arc to be drawn so maybe that is what was happening. I wonder how close to the specs I need to get? I wouldn't be scared to try the wrong value on a tube set but solid state sure isn't my cup of tea. I have had limited success fixing broken leads on these but would rather just replace it. Advice welcome!
That thermistor is in the degausing circuit and will not keep the set from powering up. Most any thermistor from a junk '80's or '90's set should work.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:29 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.