Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 08-30-2007, 02:39 AM
Tony V's Avatar
Tony V Tony V is offline
VideoKarma Member
 
Join Date: Feb 2003
Location: Brookneal, VA
Posts: 892
Tube,
Those are called networks. Its the same type or similar of networks that were used in the Predicta's that gave alot of problems. Some of those networks have resistors built into them also along with the caps. I would definately check those because any one of them could kill your vertical sweep. Have you checked your vertical output transformer and the yoke? If you have a schematic i would start with checking the voltage readings and go thru the process of elimination. Sounds like you might have a video output problem too since you get weak audio but no apparent signs of recieving a channel. Sounds like your not getting proper voltage somewhere. Does that set use selinium's? Check those also and if in doubt replace. Dont know what else to tell ya. Hopefully someone with more troubleshooting skills will pop in soon. Good luck!
-Tony
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:40 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.