![]() |
|
#4
|
||||
|
||||
|
Doug,
My Zenith "Numerical Parts Price List with Recommended Substitutions" dated February of 1974 states that both of your part numbers were superceded by part number 63-7621X (or as Zenith puts it, 063 07621 X). The YR UD (year updated) is 1970 for the 63-7620 and 1973 for the 63-7076. Price for the 63-7621X is listed as $1.45. My June 1974 "Numerical Parts Price List with Recommended Substitutions" shows part number 800-0327 (a kit?) to be a suggested replacement. The 800-0327 is skipped over in the same listing, so it may have been short lived. If it's a standard convergence pot, they were available in about 6 or 7 resistances - clarostat replacements are the U-39 series (sorry, no knob, just a + slot). Workman sourced about all of the values, but they aren't around anymore either. I wonder if RCA or GE ever used a 130 ohm pot? I'll check my stock. One other possible source - some computer monitors used a convergence-style pot for horizontal centering. I've got a 100 ohm used one in my parts drawers.Hope this helps -
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Thread Tools | |
| Display Modes | |
|
|