Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 07-14-2007, 10:44 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
The transformer measured 8.4 volts without a load, it's a 600ma transformer so it's probably running about right under a load, the heater looks plenty bright enough.

This is an electrostatic tube so there's no Ion trap but I can get a little more brightness out of it by placing a slightly magnetic screwdriver blade near the neck.

There is no sound or video yet either, not even white noise from the speaker,
the HV is unknown but the raster is pretty full and the focus is sharp where I can see it.

Odd enough that it has HV, I know the transformer had broken windings, I just smoothed them down and sprayed Lacquer on them and it worked, they may just be arcing across though because I hear a snap once in a while and the raster jumps.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.