Philco TV-123 chassis available (2)

[Pete Deksnis]

Originally Posted by vintagecollect

Need the dimensions on vent slots near top side of cabinet, are they on both sides, also dimensions for speakers slots.

Sure: There are five sets of vent slots for a total of ten slots. The first set (of two slots) begins 1.5-inches down from the top of the cabinet. The top of the next set of vent slots begins one inch below the top of the first set, and so forth to the last set.

The vent slot opening is 1/2-inch and the real estate between vent slots is 1/2 inch. [see note 1] Vents themselves are 7.5 inches end-to-end.

Vents in a given set are separated (horizontally) by two inches.

Vents are located only on one side of the cabinet. The other side, however, has a port for accessing 21AXP22 convergence magnets. This port is a 16-inch wide by 6 13/16-inch deep rectangle located five-inches down from the top of the cabinet and flush with the front of the cabinet.

Finally, the odd-size speaker openings, which can't represent anything but some screwball marketing hype idea, are 2-3/4 by 7-3/4 vertical slots. Each speaker opening has a round 8-in. pm speaker behind it.

Note 1: If you want to be exact, the actual vent slot opening is 9/16 inch with 7/16 inch of real estate between.

Pete