![]() |
|
|
|
#1
|
||||
|
||||
|
It looks like a "550" series box. They have a mono AV output. I've seen a few with a add-on stereo adapter mounted in cutout for the talkback adapter, but it's still only mono taking it's signal from the existing mono output.
A test chip for these is just a 12c508 PIC programmed with the right code which is probably still out there on various websites. |
|
#2
|
||||
|
||||
|
The one i have doesn´t. The only connections are the antenna in/outs. It doesn´t work the way you described either, so i guess it is modified or (most likely) broken. I can´t get a signal to pass through it at all. There is a good possibility that it may have been hit by lightning at some point.
|
|
#3
|
||||
|
||||
|
TV Accessory
My RCA in the living room has a porcelain Lion TV lamp on it. It seemed to fit OK
|
|
#4
|
||||
|
||||
|
I have an "O-Sonic" wireless remote control on my old Sears set. The clicker is an actual clicker and the receiver responds with a satisfying "thunk." There were no instructions when I got it, but I'm guessing the extra wire in the back of the receiver goes to the volume control. The "click sequence" seems to be On>Low>Med>High>Off.
veg Hmm. Won't let me post a picture again, so here's a Linky
__________________
|
|
#5
|
|||
|
|||
|
I have a late '70s- early 80's pioneer cable box with a tuner knob on it, an early 80's top-loading quasar vcr with rotary tuner knobs, a sony sl-5800 beta vcr, a pioneer vp-1000 laserdisc player and a sears brand CED player from 1981. They all go well with the 1977 RCA xl-100 and 1980 console that I have.
|
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|