Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-18-2007, 12:44 PM
compucat's Avatar
compucat compucat is offline
1949 Motorola 9VT1
 
Join Date: Apr 2005
Location: Suffolk, VA
Posts: 970
Here is a "before" picture
Attached Images
File Type: gif 1965 Zenith 25MC33.GIF (53.6 KB, 78 views)
__________________
Just look at those channels whiz on by. - Fred Sanford
Reply With Quote
  #2  
Old 05-20-2007, 07:00 AM
compucat's Avatar
compucat compucat is offline
1949 Motorola 9VT1
 
Join Date: Apr 2005
Location: Suffolk, VA
Posts: 970
Scotty at Hawkeye has finished my tube and has shipped it out. It will be at least two more weeks for the cabinet as the refinisher is busy. In the meantime I have been cleaning the yoke, legs, back cover, etc. When the cabinet is done, I want to have the rest of the set ready for assembly. Since I have to clean all the controls it will take a while to get all the adjustments back to where they should be. Fortunately I have the Sams so I have all the procedures for setup and adjustment. I really think this set is going to turn out well.
__________________
Just look at those channels whiz on by. - Fred Sanford
Reply With Quote
  #3  
Old 05-26-2007, 08:46 AM
compucat's Avatar
compucat compucat is offline
1949 Motorola 9VT1
 
Join Date: Apr 2005
Location: Suffolk, VA
Posts: 970
Yesterday was a busy day for the old Zenith. I disassembled, cleaned and reassembled both the VHF and UHF tuners. One really has to admire the way these tuners were built. I cleaned all the contacts, removed the turret and lubricated the moving parts. Everything went together well with no pieces left over

I had to reglue the convergence magnet assemblies as they were starting to come apart. The chassis is cleaned up, all controls sprayed with Deoxit and the tubes polished with Windex. This set must have been in a smoker's home because there was brown crud on practically everything.

Although I can't hook up the CRT and test it thoroughly because the cabinet is still not ready, I was able to hook up the tuners and speaker. The signal path seems to work (at least the audio portion) as I have sound reception on all channels. The vertical oscillator is running and its pitch varies with the vertical hold control. The high voltage section is operating and I was able to get almost 30 KV out of it. I did not run the HV for too long as I just had the probe hooked up. I know I need to adjust the efficiency coil. When the set is back together I will go through all the setup procedures in the Sams.

When I first powered it up I saw a little smoke rising from an opening in the chassis. There was no component burning smell, however, just the smell of tubes and burning dust. I think that is all it was since it has stopped and careful observation reveals nothing out of order. I can't check the video and color circuits as I don't have a scope. I'll just have to wait for the cabinet and really test it when I can install the tube.

The sound on this set is amazing. Even with just the small oval speaker, the set has more volume and richer tone than our 27" HDTV with stereo and BBE, etc.

I will post another update when I get the cabinet back.
Attached Images
File Type: jpg PDR_0426.JPG (126.5 KB, 60 views)
File Type: jpg PDR_0427.JPG (118.6 KB, 62 views)
File Type: jpg PDR_0428.JPG (118.1 KB, 51 views)
File Type: jpg PDR_0429.JPG (121.9 KB, 63 views)
File Type: jpg PDR_0430.JPG (126.2 KB, 61 views)
__________________
Just look at those channels whiz on by. - Fred Sanford
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.