|
Andy, thanks for suggestions...I did try using a .47 cap across the meter leads when I took the reading, but just got the erroneous 20 ma reading...yes I did disconnect the fuse, breaking the circuit, and hooked the meter leads one to the cathode terminal and the other to ground.
May need to just go out and get an analog VOM for the job. Also have heard about putting a 6.3 v. lamp in series w/ the plate lead to adjust the current...I might try that.
Last edited by Chad Hauris; 01-20-2004 at 10:53 AM.
|
01-20-2004, 10:51 AM
Threaded Mode