Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 03-11-2007, 08:36 PM
Whirled One's Avatar
Whirled One Whirled One is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 375
Quote:
Originally Posted by matt_s78mn
Is this the set you picked up in Rochester? It's got a great cabinet design. I really like the looks of it.
Yep! That's the set I picked up in Rochester.

Looks like I'm going to have to order up some new caps. In the meantime, I replaced the tired 5U4 and the dodgy vert tube, and that made for some definite improvement. The height and v-lin can now at least be adjusted to something reasonably close to correct without throwing the vert oscillator way out (it still needs recapping though). ...And the width/HV performance is much better now with the new B+ rectifier-- the picture didn't quite fill the entire width fully before, and it bloomed if you advanced the brightness very far, but now it fills the screen nicely and blooming is about nil.

One thing I have noticed, though, is that this set has about the most pronounced "turn-off spot" I've ever seen on any TV. When you switch the set off, you get a *bright*, tightly-focused pin-point of light that takes several seconds to even *start* to defocus or dim out, and takes perhaps 30 seconds to fully disappear. You can even see a visible "halo" around the spot that looks sort of like when you have the intensity control turned up too high on an oscilloscope. I don't see any actual phosphor burn-in, but this can't possibly be good for the CRT... Is there a typical cause/solution for this, say a bleeder resistor in the HV section?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.