|
The green halo is caused by the aging of the material that bonds the safety glass to the CRT. It's similar to the cataract problem common to RCAs. It could be repaired by removing the safety glass and cleaning out all th ebonding material.
The recent Zenith CRTs that failed were made from 1993 to about 1995. From what I saw, they had a 100% failure rate within 2-3 years of normal use. At this time, Zenith was still a company, but LG partially owned the company. The chassis in these sets looked very similar to previous Zenith sets, but performed much worse. HV regulation and the overall look of the picture was much worse for some reason. I think Zenith became completely owned by LG in about 1999. Shortly after this LG closed the Zenith CRT plant. I think LG designs all the sets with the Zenith name now.
From about 1995-1999 the quality of Zenith's CRTs improved a little, but they still had a very short life.
I have to wonder if LG intentionally trashed Zenith so they could buy the name cheaply and not have trouble shutting down all the US engineering and manufacturing.
I personally think Zenith was still making reasonably good products right up to when the CRTs started failing in 1993 just after LG gained a large influence in the company.
|