|
I can't get an image with composite video with either the BNC input or the peritel input, just a grey raster with some noise in it.
I can get something approaching an image (well some color at least) with an RGB source connected to the peritel input, but it won't sync up. I tried swapping pin 16 and 20 on the connector, but that didn't help so I must have remembered it wrong. I may be able to get the schematic, so I'll go from there.
From what I've been able to get so far I think my CRT is a bit tired, but it should still be watchable if I can fix the composite/sync problems.
|