Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 02-05-2007, 03:13 AM
Jonathan Jonathan is offline
AK Member
 
Join Date: May 2005
Location: Pennsylvania
Posts: 326
Welp guys, I have an update. I fixed the wires on the power transformer making sure everything was insulated properly. I wire it back up the right way (made sure of it). I plug it in and nothing happens until I heard a pop. C225A (250uF, 50V)(on the RCA schematic) had exploded and let out all it's smoke. It looked like a smoke bomb, it was pretty neat. The failure was on the negative end of the capacitor. I never understood this capacitor anyway. It's positive end is connected directly to the filters after the field coil, the +280V point on the RCA schematic. It's negative end is connected to the negative end of C225B (1000uF 100V). At that point it also connects to the +275V point on the schematic. I never understood how DC current goes through it or if it's part of a voltage doubler. Can anyone here explain it's purpose a bit more?

Thanks.

Jonathan
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:32 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.