|
If you want a low tech solution on just a few scratches, a brown crayon will do just fine. They also sell furniture pens at the home depot that will do the same and be a little more permanent. If you have a bunch of scratches and they are not deep (just on the surface), you can refinish just the vanish after a light sanding. I've done a few old wood case tube radios using a spray urethane clear coat and they come out looking like new. There is a difference in appearance over the old vanish or shellac finishes, but it will take you 1/8 the time to do it with the modern stuff.
|
12-22-2003, 10:58 PM
Threaded Mode