on the border: Radio Craftsmen C-810

[mhardy6647]

I think this radio, and the question I have, are more an "antique radio" than a "hi-fi tuner" question, so I am posting here.

I have a very old Radio Craftsmen C-810 AM-FM tuner given to me by a friend from our church (who most likely bought it new). Long story short, it had audio but no "radio functionality" when it was passed on to me. Turns out that it had several truly bad tubes, which I have now replaced. AM is now working quite well. FM is now working, too, though sensitivity seems to be poor.

My question, though, is (I think) AF not RF. This tuner has a volume control. Even with the volume all the way down, there is considerable static/noise. Signal will over-ride it, and there's plenty of AF gain, but the noise just ain't right. On 'dead air', the noise is independent of the volume control setting.

The noise strikes me as the kind that can arise from old/bad carbon comp resistors. Is there a best place to start troubleshooting? I don't have a schematic, but I could start near the output and work back. Thought one of the 'old salts' around here might be able to save me some sweat equity. :-)

Thanks for looking!