Admiral 20A1 problem/was1948 Admiral console cabinet from swap page - Videokarma.org TV - Video

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV
Admiral 20A1 problem/was1948 Admiral console cabinet from swap page

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

10-17-2005, 11:10 AM

Don Lindsly Don Lindsly is offline

Ex-Philco

Join Date: Jul 2005

Location: Colorado

Posts: 450

If the picture is linear and has enough scan width, then it could be that the horizontal yoke windings have some residual magnetism. Try discharging an electrolytic cap across the horizontal yoke windings. If it moves the wrong way, reverse the electrolytic polarity and try again. Use about 40-60 ufd and a 200-300 volt supply.

Don

Audiokarma

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 09:34 PM.