zenith space command problem

[drh4683]

In my space command set, I had to lubricate the pivoting electrical contact that the tuner sprocket pushes to stop the tuner on the disired channel. The tuner was non stop rotating. I used WD-40 to free the contact and now the original contact lubricant dissolved, so there is no longer any protective lube on the contacts. Now there are big elecrical arcs when the contact is pushed apart and is oxidizing them fast! Is there any good substitute lube I can use to eleiminate the arcing? I know zenith recommended a special lube for this, but doubt its still around. any info is appriciated. Thanks-Doug