Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 01-06-2026, 08:16 AM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paraná)
Posts: 515
10.5V of amplitude here explains pretty much about image size. Even if C558 is dry perhaps this occurs (bad HOT biasing in cutoff).
About base of Q501, either sync amplitude and HOUT amplitude will affects if it will rectify excess amplitude (and provokes the desired negative base voltage). But any R, C or diode can be culprit in the path. Or, simply the flyback have a very unusual fault and behaves like it are mistuned..... then a experimentation with C560 (the resonant cap one), adding a little or subtracting a little (put a 2nF/1.6kV poliprop in parallel with it), to see if pulses rise. But I advise to try to find the driver cause first.
I just remember to made this in the past in one misterious behaving TV.
__________________
So many projects, so little time...
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:03 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.