Quote:
Originally Posted by Yamamaya42
Adjusting the linearity may reduce it a bit, i have not tried to set it yet, waiting for the new width coil.
|
I don’t think linearity will make a difference with that drive line. And that set don’t have a coil with the screw rod in the middle. If not there’s got to be a way to get that horizontal frequency down. Maybe go back and look at what was done in the horizontal section besides the flyback because that line kind of puts a damper on all the work that was done already. Had the same problem with 2 sets 1 color and 1 b&w was the same thing just a slight counterclockwise and it was gone.
07-24-2025, 08:35 AM
Threaded Mode