Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 05-30-2023, 03:28 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by Electronic M View Post
They're driver chips for the scanning, HV and IIRC switch mode supplies. They tend to fail every so many years.

My DA4 chassis HD-CRT Sony has 2 of them and one blew leaving me with a dead set a few years ago...I ordered a new pair (the place sent me like 5 of them for some reason so I have spares) and somehow guessed the right one first try and fixed it with only one chip...I added a socket for that chip while I was in there so if it dies again it'll take half the time to change it.
IIRC, the one closest to the flyback was the trouble maker, the other would last virtually forever.

One of the easy ways to troubleshoot them was to heat them with the back of a soldering and apply AC - if it started, the chip was bad. Thermal intermittents are such a time saver.

John

Last edited by JohnCT; 08-21-2023 at 09:51 AM.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:19 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.