Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-08-2022, 10:25 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,254
It's a bit hard to explain, and remember, this is all founded on educated guess on what MAY be going on in the set.

In normal operation, there is a fair amount of power flowing between the plate and the cathode of a given tube, this causes the plate to heat up, and this heat is felt on the outside glass, if the tube has no power flowing but still has it's heater on, it would be much cooler.

And of course, if overloaded, MUCH hotter.
https://en.wikipedia.org/wiki/Glowing_plate

So, this could also mean that if there was a biasing problem like a H/K short or leak that would prevent the flow of power between the plate and the cathode, or any grid issue, it stands to reason it could be colder than normal. In the same way that a problem causing excessive flow makes it hot.

In other words, the radiated power from a H/K short has a much harder time making it to the outside of the tube than an overloaded plate.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.