Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-23-2021, 02:39 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by vortalexfan View Post
Well that capacitor though is where my voltages to the audio output circuit are getting lost though for sure because I measured the B+ voltage from the terminal that C49 ties to and goes to ground and I have B+ voltage there going to ground but then when I measure from that point to the other side of C50 the 10,000 pF ceramic disc cap there's no voltage there (it's -20V or so) and that is supposed to supply the voltages to pins 5 and 6 of the 6AQ5 tube, and yes I did replace C50 with a new capacitor finally and that didn't change the voltage readings any.
Let's get one thing straight here. B+ is not suppose to get to pins 5 and 6 of the 6AQ5 through C50. C50 is a audio signal coupling cap to the top of the volume control. C50's function is to pass the audio signal from the plate of the detector to the audio output grid. A capacitor is used because it's intended to block the B+ feeding the plate of the detector tube from getting into the grid circuit of the 6AQ5.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:33 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.