Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 12-11-2020, 01:15 AM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
By vertical line I think you mean Vertical Linearity.

There are two controls which must be adjusted in coordination: Vertical Height and Vertical Linearity. The Vertical Height control mostly stretches and compresses the top of ther image and the Vertical Linearity control the bottom. If the picture has black at the bottom and the foldover you describe, it is a capacitor issue.

The most likely culprit is the electrolytic capacitor in the cathode circuit of the Vertical Output tube which generally goes open. The paper dielectric capacitors tend to leak DC. These are supposed to block the DC and they too need to be replaced.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.