Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-29-2020, 07:30 AM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by Yamamaya42 View Post
When it comes to replacing the old with this one and it IS when and not IF, as it will happen sooner or later,
I already have a solid state focus rect, so why not go solid with the HV one when I replace the HOT?
with something like perhaps http://hvstuff.com/100ma-30kv-100ns-...high-frequency

thus remove all heater loads from the FBT.
I replaced a couple of hundred CTC16 flys back in the day, and I recall the big rush was in summer months when heat and humidity got to them. Most of the ones that failed were from arcing from the 3A3 socket to the core - humidity related.

I honestly don't know how much you will gain by using a SS rectifier to reduce heater loads. I would guess it's probably a half watt of heat saved overall.

Unless you're going to run this 8 hours a day from now on, and do so in hot humid weather, I really wouldn't worry about saving the heater load on the fly.

Tom pointed out a SS stick rectifier drop in replacement for the 3A3. Dad used one on our CTC9 and lasted for about 10 years before the tube went and we scrapped it. I believe International Rectifier made it.

John
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.