Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 06-15-2020, 11:10 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by Jon1967us View Post




You say you worked on a version of this TV? The one thing I would like to know is if it's possible to power on the set with the CRT outside the chassis, so you don't have to go in and out of the chassis as you're working on it.
It's series heaters so you have to short the heater pins or connect a dummy load resistor of correct value (which you compue the resistance and power of based on the current and voltage spec of the CRT heater on the CRT data sheet.

One option to service this set is to remove both the CRT and chassis from the cabinet then connect the 2 on the bench. If you have a long length of spare HV wire for the HV lead you could extend the HV and yoke leads to reach into the cabinet with the chassis outside the cabinet and use the sets own cabinet and CRT as a test jig for it.... probably good to put any floating HV connections in a glass jar or mug to prevent arcing.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.