Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 05-04-2020, 02:02 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
OK, I have a question about my Heathkit Signal Generator,
Band 1 works fine and produces a the 400 Hz test tone for the IF Alignment like I need it to, but when I go to use Band 2 which is the 550-1600 kHz band used for aligning the AM tuning band on the radio dial it doesn't produce any sound, but it does on Bands C-F which are for SW and Long Wave and FM Alignment work.

Is it possible that there's something wrong with the circuitry inside the signal Generator that's causing it not to produce the 400 Hz test tone on Band 2 of the signal generator, like a bad tube or a bad coil?

Any help with this issue would be great.

By the way I am using a blocking capacitor inline with the test leads on this signal generator.

Also I just got my new (to me anyways) Frequency counter and I need to get a Male BNC to Male BNC cable so I can hook my signal generator to my Frequency Counter, and I see a 50 Ohm version and a 75 Ohm version, does it matter which verion I use or do I need to use the 50 Ohm version for proper function of the frequency counter?

Thanks for your input on this matter.

Last edited by vortalexfan; 05-04-2020 at 02:37 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:40 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.