Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 04-08-2020, 10:26 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Some test CRTs are purpose built without dag because they are different sized than the original...The dag ground spring on the chassis probably won't touch it. If the spring isn't touching it the dag goes from a filter cap to a floating HV source for nasty static jolts and possibly a noise source.

When dag isn't grounded it tries to arc to ground and or put out Corona (the static to air discharge, not the beer, the virus or the mythical beer-virus ) both of which create electrical noise that can disrupt the set....it is worse when the dag is flaking creating dag islands or the ground spring contact point dag is the damage point because floating conductors at different potentials in close proximity make stronger more frequent arcs than distant ones.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Last edited by Electronic M; 04-08-2020 at 10:29 AM.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.