Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 09-26-2019, 11:42 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
On my BK HV probe, it was off by a mile. Tested it on the Sony KV-2643R. thou HV should be 29kv, it read 20kv. Luckily the probe has an adjustment potentiometer so I set it to what I believe that Sony should be running at 29KV. I tested a few other sets around the house and high voltage on my CTC39 was it 24KV.

On the CTC16, we were at 21kv. I bumped it up to 24kv.

If this high voltage has been running low for quite some time I wonder if this can put undue stress on the fly back. I'm sure I'm answering my own question but I noticed the other night when I ran the set for about 30 minutes the fly back cage felt warm. After I adjusted the high voltage up to 24KV I noticed after a 30 minute run the high voltage cage stayed cool..

My question is, has anyone else had to re qualify a high voltage probe like this with a known good high voltage set So you could use your meter to check other TV's? Is it's a good way to re qualify a high voltage probe?
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.