Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 08-19-2019, 01:11 AM
ppppenguin's Avatar
ppppenguin ppppenguin is offline
VideoKarma Member
 
Join Date: Oct 2009
Location: London, UK
Posts: 466
The usual process of film making is to shoot negative film in a camera and then make a positive print for projection. For colour slides and 8mm cine, reversal film was common: https://en.wikipedia.org/wiki/Reversal_film This saved the cost and effort of printing from negative to positive.

Reversal processing was very rare (never done?) for 16mm and 35mm cine.

Before portable videotape equipment TV stations shot a lot of 16mm film. Mainly for news but also low budget production. For news, the time from camera to telecine was critical. So the film was routinely scanned as negative in the telecine. The reversal to positive was done by inverting the video. There are other problems to do with grading and gamma correction but these were solved.
__________________
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.