|
|
|
#2
08-09-2018, 12:25 AM
|
|||
|
|||
|
I decided to make up all new networks like I did on my Seventeener II project.
I used my CAD program DeltaCad. I used the Seventeener II drawings a "seed" to come up with the ones I needed for this project. I etched my boards, then populated them. Then they were coated with 15 minute epoxy on both sides. Once cured, they were spray painted to approximate the original colors. 
Last edited by Crist Rigott; 09-23-2018 at 10:10 AM. 
|
|
|
Threaded Mode