Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 07-18-2017, 11:09 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
Thanks for looking! At least that resistor I have in there works ok for now.

If it weren't for that ad I posted, I wouldn't have known how much of this cabinet was originally painted silver. I've been experimenting with using Q-tips as small paint brushes to repaint those silver lines on the sides of the screen. It kind of works.

If anyone has any suggestions as to how to redo the "Philco Townhouse" script under the channel number indicator let me know? At first, I noticed it was slightly lower than the rest of the cabinet. So I painted the whole area, then attempted to scrape off / sand off the paint around it, assuming the paint in the lower spots would stay put if I just sanded over the whole thing. But the depressions where the letters were were so slight that just a little sanding with 600 paper managed to make parts of the letters level with the rest of it. So if I tried that technique again it would just come out worse.

Unfortunately, this cabinet is messed-up in several ways and there is no way I'll be done with it before I have to move to WI next week. I hate moving projects that are underway. I always loose parts.

Last edited by Adam; 10-14-2018 at 08:31 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.