Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 02-09-2017, 09:43 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
I cleaned up the adjustable coils on the top of the chassis in preparation to solder the caps to the chassis. I used my 150 soldering iron to apply a small amount of solder to form a nice fillet.



I then noticed that the hold down screws on T107 were over torqued. It looks awful.



So I pulled the transformer and disassembled it. I straightened the screws. While I had it apart I dusted it off and cleaned it gently with some alcohol. These pics are before I cleaned the coil.





I reassembled the transformer and cleaned up the case and terminals. Ready to install.



Re-installed and ready to wire. I'll do that later while I'm recapping etc. I also cleaned up the case on T108.



Next up will be to paint the top transformer cover. The transformer underneath looks very good.

My order from Digikey came in already and while the transformer paint is drying, I'll re-stuff the caps.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.