Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #29  
Old 01-27-2017, 10:31 AM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Quote:
Originally Posted by old_coot88 View Post
I would try a couple of things first. Run a jumper from the 12BY7 cathode (pin 1) to pins 3 & 9. See if contrast improves.

If it does*, check resistance from the wiper to the top lug of the contrast control when it's rotated to max contrast. It should be zero or near zero ohms. If it is, try shorting out the 39 ohm resistor R109. See if that gives more grunt.

*Be sure jumper is removed.
When I jumper pin 1 to 3 & 9 contrast improves. Not a whole lot but an improvement.

When I short out R109 (with the jumper removed from pin 1 to 3 & 9), the contrast improves just barely.

Because the contrast pot is 5K, it doesn't take a lot of rotation to really change the contrast. BTW, with the contrast all the way up, I read 94 ohms from wiper to the pot end.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.