Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 10-18-2016, 11:01 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by zeno View Post
On delta tubes typically one end of all G-2 controls at abt 250VDC.
The other end is also tied together at apx 900V "BOOST".
Check the 900V with a 1KV meter !!. Probably the G-2 are at
abt 400V. Normaly a strong jug will quickly give you the line.
Also look at all the CRT voltages to be sure they are OK.
It may turn out to be all the same cause.

73 Zeno
LFOD !
Good advice. I'd like to add that there are sneaky ways to do it with sub-1KV meters. On some tube era sets the lower supply rail is 300-350V. I've (when I've lacked a 1KV meter) measured that 350V with respect to ground, recorded it, then measured the 900V rail with respect to the 350V rail (only a 550V difference), then added the two numbers...It's crude but it works in a pinch.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.