Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 10-11-2016, 08:57 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
If the LO (local osc.) is not running, try reversing the connections of either the primary or secondary (but not both).

FWIW, it's not "the IF" which needs to oscillate, but the LO. Think of the first two grids in the tube as a triode, with the second grid acting as 'plate'. The LO tracks 470 khz higher than the received signal. The two signals mix to generate the 470 khz IF signal.

Say your station is at 600 khz; the LO will be at 1070 khz, and so on up the dial. In fact you can use a second radio to hear the LO of the problem radio, to tell if it's tracking correctly.

Did you check that 40K resistor carrying B+ to those screen grids?

Last edited by old_coot88; 10-11-2016 at 09:06 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.