![]() |
|
#11
|
||||
|
||||
|
Quote:
I don't know where you saw that Emerson logo. I looked at the ballast tube and didn't see anything but a perforated cylinder over the tube itself; there was no logo on that cylinder, unless I was looking at the wrong part. BTW, this is the first TV I've ever seen that uses a ballast tube in the power supply. Every set I've ever worked on has had a power transformer and at least one 5U4 rectifier, or series string filaments with seleniums. That this set uses a ballast tube probably dates it to the late 1940s--'47 or '48. By 1950, however, I am sure the 5U4 had taken hold as the rectifier tube of choice in most TVs, although my folks' second set, a 1955 Crosley Super V 21" b&w console, still used selenium B+ rectifiers. That set had two such rectifiers, probably wired in parallel across the output of the B+ supply. The plate voltage for the tubes was probably taken directly from the output of the rectifiers and fed through at least one filter capacitor.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
|