Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 04-12-2016, 11:06 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
The noise inverter could affect sync, but I would expect it to affect both vertical and horizontal.

The purpose of the noise inverter is to invert RF noise pulses that go beyond the sync tips, quickly clipping them and making them go towards white instead of super-black. This shortens pulses like ignition interference greatly, so that they do not overwhelm the sync separator. What would be a wide super black pulse gets turned into a narrow super black pulse followed by a wide white-going pulse (I mean that it goes in the direction of white, not that it necessarily goes all the way to white or even all the way to black level). The following RC filtering before the sync separator then tends to reduce the negative part even more (because it is now narrow), so the sync separator is much less likely to react to it.

Edit: The noise inverter could be degrading both H and V, but if one of these is more sensitive to the degradation, it could fail separately. So still worth checking the noise inverter even if only vertical is a problem.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany

Last edited by old_tv_nut; 04-12-2016 at 11:09 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.