Hotpoint 17S301 Update, formerly Jail Bars issue.

[Eric H]

Fiddling with this Hotpoint that i recapped 15 or so years ago but never finished.

There are vertical bars across the entire face of the screen and it's just a bit darker on the left edge. Caps have all been changed and all the resistors on the sweep board checked, I also checked most of the resistors on the video board but only found two slightly out of spec, I replaced those.

Checked all the tubes, subbed the damper and output to no effect.

If anyone has any ideas I'd really appreciate hearing them.

Schematic: http://vintagetvsets.com/schem/Sams%...t%2017S301.pdf